General Blog


Introduction to Electric Fencing

Constructing great electric fencing is like anything else, you get out what you put in. If you make use of the correct devices as well as good quality fencing, the outcome will be a long-term structure similar to the barbed wire fences you may already be familiar with. The benefit of making use of electric or high tension fencings is, on average, is that they cost less compared to a barb wire fencing, given that fewer products are needed, i.e. staples, posts and wire and they take less time to set up. The electrical fencing option is also more functional; you can take it down quickly as well as re-install elsewhere. This is specifically helpful during times of drought when there are field scarcities as well as manufacturers are looking for extra grazing alternatives.

Electric fencing York is a psychological barrier, more than a physical obstacle for all classes of cattle, for numerous grazing circumstances. When livestock come to understand the consequences associated with touching the fencing when the fencing is functioning the way it was developed to i.e., with the proper voltage running through it, livestock will touch the fence once and leave it alone after that. This is suitable for all seasons such as summer, spring, autumn, as well as winter and of types of grazing livestock and field sizes.

Tools as well as Installation Recommendations and Tips


All tools must be purchased from a trusted firm, thus making sure products will be guaranteed by the product manufacturer. When buying the energizer, you should think larger is better. Factor in buying a fencer that is a bit bigger than your requirements. This will enable you to make sure sufficient voltage is streaming through the cord can deal with a bush touching it as well as damp lawn taking some of the power and for allow for more future reuses. A standard rule is you require no less than 2000 volts when it’s the summer season moving up to  4000 volts when it’s the winter season to account for the thicker hair coats of the animals, as well as charge being disseminated through wet ground and as a result of snow.


  • Set up fencer where rodents cannot chew on the cables, preferably in a building.
  • Set up a lightning diverter.

Ground Rods

The grounding system is the most vital part of the fencing. Ensure you have mounted your ground rods correctly. You will need a minimum of 3, 6-8-foot-long poles positioned a minimum of 2 meters far from the energizer as well as 3 meters a clearance from each pole to another pole. The poles and clamps are linked back to the energizer using a galvanized cable.

When the York fencing is installed, you must examine to see if the fence is correctly grounded. This is done by using an Electric Fence Voltmeter along the fence with its metal bar probe as well as inspecting the ground rods with a voltmeter. If the analysis on the voltmeter is greater than 200 volts, you need more ground poles. There needs to be no-volt analysis on the meter with a properly grounded fencing.


  • Use galvanized products as they do not rust.

Leave a Reply

Your email address will not be published. Required fields are marked *